![](https://hapripurba.com/137-large_default/xaar-xj128-80.jpg)
![](https://hapripurba.com/137-large_default/xaar-xj128-80.jpg)
Compatible with a wide range of solvent inks, sublimation and oil - based, the head XJ-128 is widely used by industries coding and marking and wide format graphics. It provides a flexible and consistent inkjet solution to produce highly visible advertising.
Xaar 128 | ||
Active nozzles | 128 | |
Print swathe width | 17.4 mm | |
Nozzle pitch | 137.3 μm | |
Drop velocity* | 6 m/s | |
Nozzle density | 185 npi | |
Printhead weight (dry) | 15.5 g | |
Fluid type | Solvent, UV, Oil-based | |
Drop volume* | 40 pl | 80 pl |
Typical firing frequency | 8.3 kHz | 4.25-5.5 kHz |
Dimensions (WxDxH) | 38x12x41mm |
Processing time after receiving payment is 2-3 days.
You accept responsibility for proper installation. If you are not sure how to install the print head, contact a trained repair technician to do the installation. Unfortunately, we cannot give you instructions on how to install this print head on your printer.
Note: check other boards & cables for damage before installing any print head. If these other items are damaged, they may damage a new print head. Consult your service manual for further information.